2017-2020 ZR2 Winch Mount

(11 Reviews) Leave a Review

Midwest Overland Industries ZR2 winch mount is for the owner who wants to keep added weight to a minimum and is happy with the factory front end protection. This mount consists of 2 main parts which are the winch mount and your choice of a roller fairlead adapter for steel line or our custom fairlead for synthetic line.  Cutting of the front bumper is required but is easily covered up with the factory front plate holder if plans change. The radiator air ducts can either be removed or cut to allow room for winch mount. Any winch that is 24.5" or less and 7" from center of mounting hole to side of winch should have no issue with fitting, but we recommend choosing a winch with a remote mount control box in case vertical clearance is an issue. Our optional front plate mount with thumb screws for quick release makes a great option for those who are required to run a front plate. Shipping included to the lower 48.  Please contact us for shipping to Alaska, Hawaii, and Canada.    


  • Under 100lbs using synthetic rope
  • Fits any winch using 4.5" x 10" mounting pattern and under 24.5" wide
  • Comes powder coated and ready to mount
  • Tab and slot construction for superior strength and ease of manufacturing
  • Uses factory recovery points while retaining the factory recovery loops
  • Designed to easily add lighting in the bumper opening or with our optional Bull Bar Light Mount
  • FaroArm checked for superior fitment
  • Fits 2017-2020 ZR2


*Fairleads come standard now as hard anodized gray and is the only option. 

*Warn XP & CTI series do not fit within the mount.

*Not compatible with Blue Ox flat tow system

*Will not work with any body lift 

*Photo shown with roller fairlead and synthetic rope.  Don't do this!! This was only done due to time constants and not actually used this way. 

Winch Line Style *
License plate mount
Shipping Cost
Calculated at Checkout
40.00 LBS


5 based on 11 reviews.
Leave a Review
Lead times are on time!
Written by Steven Grimes on Apr 26th 2021

This mount it super strong and super clean. You can fit a rough country 12k winch. Don’t forget to read the instructions! I will be back for the bull bar!

ZR2 winch mount
Written by Greg on Dec 20th 2020

Well made and thoughtfully designed mount for a hidden winch installation. I recommend chasing all threaded holes with a tap prior to installation, and use grease or anti-seize on all stainless hardware, as it likes to gall. Installation instructions are pretty clear, but could use some clarification regarding the trimming of the plastic grille support in front of the radiator. I removed the entire lower section of mine, leaving the lower row of fastener holes. I considered leaving it off entirely, but then the grille loses 4 critical anchors. Overall, highly recommend this mount!

Hidden winch mount
Written by Tyler on Jun 9th 2020

Great product, fast delivery, and easy install. Only thing I would suggest is chasing the holes with a tap when you receive it, mine was full of paint or powder, and could not get the screws in for plate mount. Had to clean the threaded holes out. Haven't tested it out yet, but all seems to be good!

Excellent Lightweight Zr2 Winch / Pull Bar
Written by Mina on Jan 13th 2020

There is no lighter solution to add a winch and bull bar. The install was easy, customizable to fit my needs and very light. when every pound matters go with this setup.

ZR2 winch mount
Written by Will B. on Nov 17th 2019

By far the best fitting winch mount I have ever installed, excellent instructions with pictures. Would definitely recommend to anyone with a ZR2 who wants a winch but doesn’t want to go with a full bumper.

Related Products